fbpx

BioMed Clear Resin

Biocompatible Photopolymer Resin

BioMed Clear Resin is a rigid material for biocompatible applications requiring long-term skin or mucosal membrane contact. BioMed Clear Resin is the perfect choice for applications that require wear resistance and low water absorption. Parts printed with BioMed Clear Resin on our FormLabs printers are fully compatible with common sterilization methods.

Consider BioMed Clear Resin For:

Medical device and device components

Jigs and fixtures

Surgical planning and implant sizing tools

Research and development

Tensile Strength

  • Post Cured (Imperial) 52 MPa
  • Post Cured (Metric) 7.2 ksi

Water Absorption

  • Absorption Level: 0.54%

Available Colors

Material Properties

Strength
Impact Resistance
Heat Deflection
Surface Quality
Properties Metric Imperial
Young’s Modulus 2080 MPa 302 ksi
Elongation at Failure 12% 12%
Flexural Strength at 5% Strain 2300 MPa 332 ksi
Impact Properties 0.3 ft-lbf/in 0.46 ft-lbf/in
Flexural Modulus 2300 MPa 332 ksi
Hardness Shore D 78 D 78 D
IZOD Unnotched Impact Strength 449 J/m 8.41 ft-lbf/in