fbpx

Castable Wax Resin

Castable Wax Resin

Castable Wax Resin accurately captures intricate features and offers the smooth surfaces stereolithography 3D printing is known for.

Versatile & Strong

Castable Wax Resin is Printed Using Formlabs Printers

A 20% wax-filled photopolymer for reliable casting with zero ash content and clean burnout, highly accurate Castable Wax Resin captures intricate features and offers the smooth surfaces stereolithography 3D printing is known for. Printed parts are strong enough to handle with no post-cure required, allowing for a faster, simpler workflow. If you would like to learn more about the Castable Resin we carry, check out the material specs section found on this page. Otherwise, please click the red button to begin your Castable Resin printing project.

Tensile Properties

  • Tensile Strength – 1680 psi
  • Young’s Modulus – 32 ksi
  • Elongation at Break – 13%

Burnout Properties

  • Temp @ 5% Mass Loss – 480F
  • Ash Content – 0.0 to 0.1%

Available Colors

Standard Burnout Schedule / Specs

Strength
Impact Resistance
Heat Deflection
Surface Quality
Phase Time Schedule °F
Insert Flasks 0 min 302 °F
Hold 60 min 302 °F
Ramp 100 min 4 °F / min
Hold 120 min 700 °F / min
Ramp 180 min 3.6 °F / min
Hold 280 min 1350 °F
Ramp 100 min – 4 °F / min
Hold (Casting Window) Up to 2 Hours 954 °F