>

Nylon

Nylon is best classified as an engineering grade thermoplastic.

Strong & Good Looking

Nylon reinforced with one of our continuous fibers becomes a next-level 3D printing material.

Nylon itself is non-abrasive, and that means it can be painted quite easily. You can use Nylon as reinforced material alongside any of our continuous fibers to create a product that holds the unique properties you require. Learn more by checking out the material tech specs sections below.

Order Now
humidity

Part Resolution

50 Micron – 0.05 mm
100 Micron – 0.1 mm
125 Micron – 0.125 mm
200 Micron – 0.2 mm

resilience

Max Part Size

330 x 270 x 200 mm
( 12.9 x 10.5 x 7.8 in )

pipette

Available Colors

  • White

Material Properties

Strength
Impact Resistance
Heat Deflection
Surface Quality
Properties Result ISO Test
Tensile Modulus 1.7 GPa D638
Tensile Stress at Yield 51 MPa D638
Tensile Strain at Yield 4.5% D638
Tensile Stress at Break 36 MPa D638
Tensile Strain at Break 150% D638
Flexural Strength 50 MPa D790
Flexural Modulus 1.4 GPa D790
Heat Deflection Temp 105º F D648 B
Izod Impact – Notched 110 J/m D256-10 A
Material Data Sheet